Flashseg readme - 7/30/03 djm


Flashseg is a utility to download flash memory updates to the VT1413,VT1415,VT1419 or VT1422
 family of products.  It uses VISA and PNP libraries and is supported on most current slot 0 controllers
commonly used with these modules (i.e. Agilent E1406A, E8491B, NI MXI 2, ...).

* Requirements:
*   1) Installed VISA I/O libraries.
*   2) Installed  Plug and Play driver for VT1413, VT1415/19, or VT1422.
*   3) [FLASH0.RU], and [FLASH3.RU] files from must be
*      located in same directory as flashseg.exe.
*   4) VXI instrument active and accessible from VISA interface.

*   flashseg must be run from the command prompt and the current directory must be the same
    as the directory containing the files from this zip file.

*
* Output files:
*   -  [E14XXX.BIN], contains DSP Flash Rev # you are about to overwrite and must be deleted before
	running the update untility
*
* Notes:
*   1) The DSP flash is identical between the VT1419 and VT1415.
*******

The program will prompt you for the VISA Address.  It is expecting a
response in the form of VXI[Board]::<LogicalAddress>
	(e.g.  VXI0::208  - this is default for the VT1415A).

The actual programming can take several minutes so be patient and at the conclusion, you can 
check E14XXX.BIN which will give you the rev code of the removed firmware and the unit serial number.


